1. The fuselage structure is welded with Guoyou A3 iron plate and processed vertically after eliminating pressure at high temperature.
2. The oil cylinder is made of nodular cast iron, and the piston is made of solid chilled cast iron, with hardness of more than 56 degrees, wear resistance and no scratch.
3. Heating oil cylinder diameter 8 inches
4. The cooling oil cylinder is installed upside down to prevent cooling water from being brought into the oil cylinder.
5. The power system adopts excellent brand: Datong
6. The high and low hydraulic system adopts Taiwan KCl high flow system to make it long service life and stable.
7. The machine has a logic system, without oil pressure relief
8. 5mm thick seamless steel pipe shall be adopted for oil pressure piping and pickled after welding, and imported products shall be adopted for seals to prevent leakage.
9. The electric control is controlled by PLC and touch screen.
10. The operating table is welded with angle iron and equipped with stainless steel mold trolley.
11. Stainless steel sink is set on the operation surface to prevent waste water from falling to the ground.
12. It can be designed and manufactured according to customer requirements.
|Heating 8 "200mm
|Cooling 4 "100mm
|460mm × 450mm
|Cooling 460mm × 450mm
|Number of layers
|Number of stations
|one point five × two point one × 9.8(M)
|Steam, hot kerosene